Originally Posted by Kaz-kzukNA1
Hi, Thunder.
Unlike the engine oil filter, you will re-use the MTF strainer (filter) once you have inspected and cleaned it so don’t throw it away.
Strainer cover looks like this and you just need to replace the O-ring after removing the cover.
You will see above parts inside the cover. The O-ring is located at the cover.
If you have never done this before, it would be best to get hold of spare strainer cover in case you have damaged it.
O-ring: 91307-PR8-005
Strainer Cover: 21261-PR8-000
You can get them from your local Honda garage.
Good luck.
Regards,
Kaz
Hi Kaz, thank you very much for your good councils! and, excuses me for my error!
best regard
Alain
Reply With Quote