Time for another compression check.
Once again, spending hours on valve clearance adjustment paid off. The compression for all six cyl were within 2psi window. When the car was delivered, #6 cyl showed quite big difference from other cyl but now it is really close to others.
IGN Coil installed and torqued to the spec.
Applied silicone grease to the new rubber seal on the IGN Coil cover. Must items to be replaced.
Please apply silicone grease at least once a year in the future especially at the rear bank in order to prevent misfire caused by moisture getting to the base of IGN coil body.
I may need to add small amount of extra coolant but for now, the Engine room is done.
Reply With Quote