View RSS Feed

Electronics

  1. Clock

    by , 17-07-2012 at 11:28 AM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)




    I always wanted to test this mod but because it was so simple,
    it was just left at the bottom of the list and never had the chance to do it on my NSX.
    I think another member here questioned the same thing long time ago.

    As I had some spare time today, finally decided to try it.


    It is to disable the illumination
    ...

    Updated 26-09-2014 at 03:56 PM by Kaz-kzukNA1

    Categories
    Electronics
  2. Electronics bits and pieces

    by , 19-06-2012 at 10:27 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)




    As I didn’t want to start removing the parts
    such as the coolant hoses, CL master/slave/hose, etc without
    having the confirmation from Japan on the parts availability, decided to
    work on the electronics parts over the past few days.

    You don’t want to remove the coolant hoses only to find that it is on back order for
    ...
  3. Main Relay

    by , 14-06-2012 at 10:07 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    Nothing new here so just a quick note
    for the owner on replacing the Main Relay.


    You can follow this procedure
    if you want to DIY the Main Relay.


    N
    ew one installed and the existing one will be re-soldered and
    returned to the owner as an emergency spare.



    ...
    Tags: main relay Add / Edit Tags
    Categories
    Electronics
  4. Main Relay

    by , 19-04-2012 at 10:44 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)

    Nothing new here and just a standard process for me.

    If you are interested in DIY, please visit here;
    'Main Relay' under 'Electronics' section of 'NSX Technical and Service Information Index 02'







    ...
    Tags: main relay Add / Edit Tags
    Categories
    Electronics
  5. Preparation 02

    by , 19-04-2012 at 10:43 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)

    Not great weather so instead of test driving session, started replacing the IG switch.

    No wonder why the owner was having difficulty starting the engine or keeping the engine running.

    The terminals were showing the fretting corrosion resulting in intermittent connection.

    Unfortunately, there was an additional wire attached to the existing ...
Page 39 of 46 FirstFirst ... 293738394041 ... LastLast