Gauge Cluster Bulb Replacement

[Kaz-kzukNA1]

Hi, Heineken.
Yes indeed, you are already within the bloggers group so should be able to post something.

As I don't have access to several part of the setting of this Forum, just added temporary 'Title' and 'Description' in your blog setting.


After logged in, please click on the [ Blogs ] tab in the header section next to [ What's New ].

You should see the page 'Recent Blogs Posts'.
If you look towards the right, can you see a tab labelled as [ + Create New Post ] ?

If so, press it and just enter something to create a test blog entry.


Under the top banner/heading menu, there are several command tabs in smaller text.
Select the [ Blog Settings ] tab.
In there, you can change the temporary 'Title' and 'Description' that I created for you.


You can also change all the Permissions & Privacy setting from the Left had menu.
The only change I made from the default setting was to enable the 'Moderate comments before displaying' option.
Again, please set them up to suit your preference.


Regarding the attachment feature....
I stopped uploading attachments long time ago as the feature was not user friendly, lots of limitation on the format, layout, size, etc and didn't want occupying the server space with 1,000s of photos.
One of the reason why I don't like this platform as I can't layout the photos in the way I want to.

For the photo, instead of uploading, best if you can host it somewhere else and then paste the direct link to the file in your blog.
That's what I'm doing for all of my blog entries these days.


If any problems, let us know.
I'm back to multiple tasking mode over the last few months so slow to respond to many things but this week is not too bad so will re-visit here regularly.


Kaz

[Heineken]

Thank you very much for the support so far.
Going to try out the features intensively and think about a good setup.

[Heineken]

Found a little time this evening to play with the blog feature.
First try was to create a custom landing page, which worked to some extend.

It was possible to create a custom page: http://www.nsxcb.co.uk/blog.php?cp=27

Many formatting options are working but there seems to be an issue regarding lists.
This is the page while editing. It contains a multi-level list, some code and a table:




When using the preview options it looks partly OK (the bullet type for the second level is incorrect):




Unfortunately, after saving, the lists are gone completely:



I checked the manual but could not find any option specifically related to lists.
Has this issue been observed before?

[Heineken]

Just a little update from my side.
While writing the first blog entry, it looks like the list feature is working for blog entries, not for custom pages, though.

The fact that tags can't be changed after saving a blog (or draft) for the first time is confirmed.
I could imaging it has something to do with the tagging system in general: https://www.vbulletin.com/docs/onepage/#item62 - maybe those options could be checked?

[NSXGB]

?..unfortunately I do not have admin rights to assist you any further...

[Heineken]

Oh, I'm a little surprised but thanks a lot for your support so far
May I ask who or how is administrating the site on server level? I run my own web server with different services and might be able to assist.

[NSXGB]

Oh, I'm a little surprised but thanks a lot for your support so far
May I ask who or how is administrating the site on server level? I run my own web server with different services and might be able to assist.

User Forumadmin (Kevin) manages the server and holds the ultimate power. You could drop him a PM. Unless Kaz or Paul has any idea, or higher access than me...

[Procar Specials]

Hi Lars,

glad to see that you post so much informations.
You are back in good old G.?

[Heineken]

Hi Lars,

glad to see that you post so much informations.
You are back in good old G.?

Since end of 2016, that is.