NSX Refresh

[Papalazarou]

That's a great Fit. Looks very clean and sharp.

Cheers,

James.

[Kaz-kzukNA1]

As always, beautiful craftsmanship. Looks really nice.
I was thinking about replacing the visor, A-pillar and the celiing to the later spec black ones but yours looks also nice.
I know it's bit too early to ask but any plan in doing these in different material?

.......
Off-topic but does anyone know what the bulbs in the door cards are called? Last time I took one out they looked like festoon bulb but a smaller version of one in all dimensions. I want to buy led replacements so when I'm working on the interior of my car I don't have to worry so much about flattening the battery or taking the bulbs out. Cheers.

Yes, it's bit off topic so apology, Sudesh.

You can use 30-31mm LED festoon bulb.
One example here; http://www.nsxcb.co.uk/entry.php?76-Lots-of-LEDs

Kaz

[NSXGB]

Could your supplier make just the covers for a DIY fit?

[Sudesh]

As always, beautiful craftsmanship. Looks really nice.
I was thinking about replacing the visor, A-pillar and the celiing to the later spec black ones but yours looks also nice.
I know it's bit too early to ask but any plan in doing these in different material?

Kaz

Hi Kaz,

I can do just about any material, as you know the later spec car doesnt have leather roof, pillars visors etc, its woven fabric almost similar to speaker cover material.

At some stage, I'm going to completely do my interior the same as NA1 NSX-R, just need the seats and rails first.

[Sudesh]

Could your supplier make just the covers for a DIY fit?

Not at the moment, dont really like the idea of doing covers as such, as it takes a bit of work to get everything nice and tight with a real quality factory finish. I've seen attempts at seat cover fitting before, and they dont always look that great to me; some sagging in place or loose fitting etc. So dont want to offer a service where the product might end up looking just ok, I want it to be perfect.

[Sudesh]

Really nice workmanship ... if only there wasn't so much water between us!

Thanks Paul,

If you really wanted to send bits this way, most cost affective if it's allot would be to put it all on a pallet, only around £90 to send like that.

[nobby]

saw the interior in the flesh today!

pics are good but simply dont do the work justice.

the finish on everything is top notch and the nappa leather is of high quality indeed. takes years of the dated NA1 interior look imho.

the roof is just in another league ... way better than OEM and is very modern looking

fantastic work which i plan to have done in due course ... hopefully sooner rather than later (unless other options come into fruition )

if u want/need a refresh of your interior, you simply cant fault this.

and for all u mainland residents ... posting/shipping to NI is not as bad as you think

[Problem Child]

OOoooooooooh...............I want that!

Are you taking orders?

I'm off to get the ferry ticket now!

[gumball]

Looks very very good. Although I don't go for updating cars to try to make them look like a different era car, the old pleating is just not as nice as this later type finish.

[Sudesh]

Although I don't go for updating cars to try to make them look like a different era car.

Thats Another reason I steered away from doing the newer OEM interior; didn't want it to look like the interior was just taken straight from that model and as mentioned the more I looked at the perforated facelift interior, the less I liked it.

My way isn't trying to copy a different era, it's basically breathing new life into the very dated 80s/90s look, of the pleated interior.

But we can do the interior to what ever someone likes, right down to replicating the facelift interior if people prefer that.

I should have samples of gear knob refurb and steering wheel in the next week or so.