Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: ozon02 - NSX story

  1. #1

    Default ozon02 - NSX story

    Disappointing story

    This year I have done some modifications - like this: Os giken Clutch, Os giken LSD with 4.40 final ratio and Tein shock absorbers.
    I bought a track day in the Czech Republic - Motodrom and in Slovakia - Slovakia Ring
    I booked the hotel I persuaded my wife and sent the kids on holiday. I ordered a tow truck and got on the road ...
    My NSX refused to cooperate - entering the tow truck came fail EPS, # 22 reset with the clock fuse. I started the engine EPS lamp went out and thought it was OK. But by turning the steering wheel, the EPS light shone again with the same fail # 22.
    I only had 2 hours to repair - later my trip made no sense.

    Has my NSX offended me for modificatioons ?

    Kaaz described the fault for my driver model (..... 023) burned relay contacts.
    I ordered this in the USA with enlarged contacts (delivered time approx. 2 weeks).
    On the web I suspect that the pins are in line with the standards. I decided to put another - from the Renault 70 Amper- (it does not like you Kaaz?
    Unfortunately, a diode was inserted in the trigger circuit. I missed the direction of the diode and damaged the transistor - it took me 6 hours to find this fault.

  2. #2

    Default

    It was difficult to solder the relay - I made a special tip

    Click image for larger version. 

Name:	20170704_115543(1) (1024x614).jpg 
Views:	64 
Size:	328.9 KB 
ID:	13057

    Click image for larger version. 

Name:	20170704_115609 (1024x614).jpg 
Views:	63 
Size:	329.7 KB 
ID:	13058


    23/5000




    But he was not warm enough

    One more time
    Click image for larger version. 

Name:	20170704_115735 (1024x614).jpg 
Views:	64 
Size:	359.2 KB 
ID:	13059

  3. #3

    Default

    I dismantled the relay housing - one of the lower corners was burnt contacts the second as newClick image for larger version. 

Name:	20170704_115940 (1024x614).jpg 
Views:	59 
Size:	245.3 KB 
ID:	13060 Click image for larger version. 

Name:	20170704_115954 (1024x614).jpg 
Views:	62 
Size:	255.9 KB 
ID:	13061

  4. #4

    Default

    I measured the resistance of the coils (OEM and aftermarket) and compared with the catalog.Click image for larger version. 

Name:	20170704_121822 (614x1024).jpg 
Views:	55 
Size:	249.2 KB 
ID:	13065
    Click image for larger version. 

Name:	20170704_121716 (1024x614).jpg 
Views:	53 
Size:	298.9 KB 
ID:	13062 Click image for larger version. 

Name:	20170704_121731 (1024x614).jpg 
Views:	50 
Size:	323.7 KB 
ID:	13063

    The aftermarket Relay was larger by 30mA. The coil transistor was on 1 Amper Current ( Catalog)


    But the difference in contact area was satisfactory
    Click image for larger version. 

Name:	20170704_120055 (1024x614).jpg 
Views:	56 
Size:	304.2 KB 
ID:	13064

  5. #5

    Default

    It's late (I'm going to sleep) but one question bother me - why the other of the relays (the good ones) during the switch vibrate the contacts (3-4 stroke)

    Regards
    Mario

    P.S.A little anger passes me

  6. #6

    Default

    Next occurence (frustrating) with the Air Condition Panel - reading the blog Kaaz noticed that he often repairs the AC Panel. Two years ago I bought from the USA (Prime)as a reserve.
    And my checked - no leakage capacitors. I thought it did not concern me. This year I bought from Chritian ATR only Front panel witch Celsius (We were Acura in Farenheit). When the ACC panel was opened - I nearly fainted - four capacitors poured out. It's a lesson for me that I ignored the Kaaz hints (absolutely replace all the capacitors). Now please Kaaz as far as possible which electronic components I should still check.

    In one year coincided - only faults !!!(clutch,EPS,ACC Panel)My Acura is 1996.

    P.S.
    During the rapid acceleration I noticed misfire in exhaust(This is the cause of the change final ratio to 4,40) ?

  7. #7
    Join Date
    Dec 2007
    Location
    Switzerland
    Posts
    935

    Default

    All cars need some attention after 20 years. As they equipped the NSX with quite a lot of electronics more things need to be addressed after these years. I don't dare to imagine todays rolling computers after even 10 years. When they will be exported to Africa all the electronics will be ripped out of the car. Ok, a little bit OT.

    Well, 20 years for a CCU is not bad at all, they normally begin to fail after 12-15 years or so (with the quality of caps they used originally). You need to replace ALL caps. And that's better done BEFORE the unit shows suspicious signs.

  8. #8

    Default

    I have more and more free time ....
    I decided to do some outstanding work ...

    1.Alternator color change

    Click image for larger version. 

Name:	20200327_123844[1].jpg 
Views:	21 
Size:	77.3 KB 
ID:	13872

    I dismantled the alternator and painted the aluminum casing at the factory with stove varnish paint

    Click image for larger version. 

Name:	20200401_185811[1].jpg 
Views:	18 
Size:	74.4 KB 
ID:	13873

    Click image for larger version. 

Name:	20200327_123948[1].jpg 
Views:	18 
Size:	65.5 KB 
ID:	13874

    New Bearing

    Click image for larger version. 

Name:	20200402_105347[1].jpg 
Views:	17 
Size:	103.2 KB 
ID:	13875

    Click image for larger version. 

Name:	20200402_133843[1].jpg 
Views:	17 
Size:	105.5 KB 
ID:	13876

    Click image for larger version. 

Name:	20200402_145120[1].jpg 
Views:	27 
Size:	66.8 KB 
ID:	13877Click image for larger version. 

Name:	20200402_145120[1].jpg 
Views:	27 
Size:	66.8 KB 
ID:	13877

  9. #9
    Join Date
    Mar 2013
    Location
    Crawley
    Posts
    1,843

    Default

    Christ, I bet that was like watching paint dry ozon02 😂
    Pride.

    1992 My beloved Red/Black manual NA1.😎
    1992 Chevy Lumina apv Rockford Fosgate sound system demo van.🙉
    2003 Hartge Mini Cooper S (2 x UK & 1 x European sound quality finals winner) 🏆 

    "The NSX's greatest victory was to WIN the 1995 Le Mans 24hr GT2 Class"
    ..............and guess what, it was a RED one but of course.  

  10. #10

    Default

    Yes you are right.
    I also gave the valve covers to this factory - but unfortunately I did not get the original effect.

    Click image for larger version. 

Name:	20200405_204804[1].jpg 
Views:	19 
Size:	58.5 KB 
ID:	13879

    Click image for larger version. 

Name:	20200208_181019.jpg 
Views:	18 
Size:	60.8 KB 
ID:	13881




    (I spent a lot of hours working on cleaning).

    Click image for larger version. 

Name:	20200405_204729[1].jpg 
Views:	16 
Size:	61.7 KB 
ID:	13880
    I bought American paint (wrinkle plus) and try it myself. By heating a hot gun, you can influence the process of creating wrinkles so that you get closer to the original.
    Unfortunately, varnishing is my Achilles heel.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •