HELP....Favour Needed from Friendly NA2 owner

[Ozmondo]

Would spacers not correct the problem? Just an idea as people have done similar on other cars

[wixer]

Probably what I will do but I'd like to cover all possible solutions.

[Kaz-kzukNA1]

Hi, Wix.
Cant reply to your PM (I have problem accessing it due to the setup I have) and as far as I can tell, not something to be kept behind the door as PM so going to answer here.
Next time, please use email.

The stud bolt is 12mm x 1.5pitch, not 1.25.
The spline diameter has 2 steps. One at 12mm and the largest spline diameter is at 12.2 - 12.3mm.
You need to check the number of spline though.

If you order spacer from well known manufacture such as H&R, they have the spacer with longer stud bolt spec designed for Honda.
Depending on the spacer thickness, please use the hubcentric type spacer although I don't know the spec of your aftermarket wheel.

Kaz

[wixer]

Hi Kaz,
Thanks for your reply.

I've found a supplier of wheel spacers and he's going to sort some correct extended studs.

http://wheelspacers.uk.com/index.php...ts-studs-.html

Fortunately, I also live in Coventry.

Cheers