Small question regarding the clip for the cylinder rod to cylinder.
Didnt found that part into the parts cataloge
72137-SS0-003 seems to fit, but not sure
Maybe someone knows. Thanks
14879...
Type: Posts; User: Procar Specials; Keyword(s):
Small question regarding the clip for the cylinder rod to cylinder.
Didnt found that part into the parts cataloge
72137-SS0-003 seems to fit, but not sure
Maybe someone knows. Thanks
14879...
This part finally completed my carbonfiber interior modifications.
Its the clock unit with his filigran cap.
14745
14746
I assume this is one of the sealing bolts for the oil passage of VTEC.
Sometimes they start leaking oil from there.
I had the same problem some years before.
I doesnt found new bolts into the...
Hi Lars,
glad to see that you post so much informations.
You are back in good old G.?
car.
This is an oil cooling system for the gearbox.
Nice idea and solution.
The oil temperature of the gearbox is tendentially higher than from the engine, so an cooling system makes sence for...
after 9 years of storing, this NSX is alive again.
Last race was in 2002 during the NSX (Trophy) days in 2002.
13921
13922
13923
Well, before you send it please send me some pictures to my eMail adress.
I'm not sure if I can get an rebuild kit, I have to ask Showa in Japan first.
My engineer from Bilstein can maybe help...
I'm still around....and busy.
Checked that you got a used NSX-R NA2 suspension in year 2004.
The suspension was installed for test reason in Germany (Nordschleife) at the NSX-R NA2 prototype, but...
Its my best friends car.....so I'm quite close and promissed to help him.
Its a time consuming progress, but we do learn al lot.
Finaly its like Feiny and Groby........NA1/2 = filigran NC1 =...
Quiet intesting how light all parts really are, that front frame is ultralight.
Also front bumper beam, Hood and Fenders.
I'm quiet sure if Honda would remove the whole Hybrid system,
the NC1...
Its very interesting how Honda did attach that support frame.
Nice progress from our side, because we got a complete intact support frame.
Quite sure that these pictures are very rare.
...
Thats the actual status of your new project.
We removed the complete aluminium front section, because some of these parts were damaged during a smaller impact.
Its no good idea that the preowner...
Well, if you take a look at the german market situation, the prices are quite high.
Start with 138.000 Euro for a (rent) car with 43.000 km, not sure how many drivers were involved and ends with...
Well, there is only a small market.
As reported, Honda stopped to deliver NSX's to Europe for 2020...…..so no further NSX's.
In Germany the NSX cant be ordered since November 2019. Bummer
Last Weekend, I have calculated the prices for a proper repair.
Only for parts 40.000 Euro
front hood incl smaller parts and headlights ~ 7.000 Euro (In USA, the bonnet will cost ~ 10000 USD)...
Nice shots.
Since some days, I really had the thoughts to buy such a new car.
1 week before, one of my friends in Germany bought an NC1 with 'normal' front damage,(belgian preowner) so actually...
Here is a picture how the side mirror looks if all single parts are removed.
You also have to separate the cables from the connector, good idea is to mark them.
Another gremlin is the small...
Best advice is to turn the top part of the side mirror ~ 90° to the window before you remove that complete unit from the door.
Than you have best access to the 2 golden Philips screws, which holds...
After you have connected both sides of the electric cable and place with plastic leading pin to the mirror housing holder spring, this picture will help you to find the right
hand position to press...
Both are great cars.....each with his own charactere.
Glad that I own both of them.
Looks like I will hold the Type R for a long time, the pre Facelift Turbo Civic Type R Design I do like a lot...
I also think that the early NSX race cars looked the best.
My favourites are the 1995 LM car and the 2002 JGTC NSX
The white NSX-R from 2002-2006 is still in german hands, Honda Fugel in...
Its quite difficult to find a good mounting place, that GoPro's superview will work.
This is my 2nd try from last satuday, it still sits a bit too low.
I corrected that yesterday.
But the video...
]here we go.....my baby's
http://hondaboard.de/wcf/images/photos/thumbnails/large/photo-13153-f75ed116.jpg
http://hondaboard.de/wcf/images/photos/photo-13154-71981826.jpg
Hi,
its the GoPro 7 with integrated stabilizer.
It was quite dark into my garage, but I was surprised that the record worked that well.
Hope I can do some more videos this year.
...
exhaust parts...