Thanks to all for your help just placed an order with vtec. Claudio
Type: Posts; User: cas; Keyword(s):
Thanks to all for your help just placed an order with vtec. Claudio
hi
Please send a message if you have one for sale.
claudio
Hi All
Manged to get replacement ball joints - need a worn knuckle to see how difficult they are to fit - if anybody has one let me know so I can put together a step by step guide.
Claudio
Hi fellow members
Just had some contact with Steve in the USA. He has made new ball joints but they are not a direct repalcement for the ones in the knuckle and require some maching which is why...
Hi Kaz
Do you know where I could get a SANKEI part number 51220-s84-a02 ball joint?
regards
Claudio
Hi Kaz thank you for answering my question it is much appreciated. My car is a RHD 1995 targa the front lefthand knuckle has the following part number:
51215-slo-902 (this is same for all car ...
Hi Kaz
Still have'nt got the hang of this new site. Is a 1991 - 1994 knuckle the same as 1995 on wards. They have different part numbers. All the stuff off mine can be transfered to a 1993 so...
Hi Kaz
Car just failed MOT worn front lower passingerside ball joint. It seems Honda do't do ball joints and the whole knuckle has to be replaced. Have you ever replaced one one these ball...
Hi
Is anybody able to provide a picture of the ac board with a list of what capacitors are linked to what functions to help with fault finding.
claudio
Hi Duncan
Can I have a set of capacitors please?
regards
Claudio
Hi
Is it an OEM clutch? Mine has a competition clutch and was virtualy undriveable when I got it - in fact so bad that the owner sold the car - he made the mistake of asking for a stronger...
hi
Kaz when i examined the switch it has a small cover in the centre. I removed this and it looks like there is a bulb holder but no bulb. Do you know if it would work with a bulb?
Hi
Can anyone tell me does the hazard warning light switch Flash on and Off when the switch is pressed? It looks as if it should but mine does not.
cas
hi fellow nsx enthusiasts.
The nsx uses lots of plastic. Last couple days I have trying to fix my ccu - it just struct me that the pastic in my nsx is getting more brittle - mine is an 95 nsxt...
Hi If the clutch is slipping the car won't accelerate quickly so if you have'nt noticed a change in performance it is notvery likely. Sometimes the clutch can sound as if it is slipping but realy...
Hi
The oil presure builds up to 4.5K and then drop when the vtec engages and settles down in the middle of the range. The reason for the drop is that when the vtec engages the oil has to travel...
Hi
This is something that it is worth learning how to do. NSXprime has the user manual on line and a full decription of codes is in the manual. You don't need any special equipment only a paper...
Hi,
Don,t replace your tyres unless they are worn becuause the error will still be there.
1. Reset diagnostic system by removing clock fuse.
2. Sit in car startand start the engine.
3. Take...
TCS will switch it self off if tyres are not right. Remove clock fuse to reset error codes does your EPS come on? Early cars had a problem with the eps control unit - if you moved the steering...
Hi
It is rosso corsa with black interior.
Claudio
Hi mark
I will be in the green area - entry no 201 the name is Claudio
The Bora is a great car but I once met an owner at Supercar Sunday (Gaydon) who had just bought a Bora and said that...
Greetings gentlemen! I don't think anybody buys a supercar because they are worried about resale values - I think it is because they want to drive one. Low secondhand values mean that you can buy...
Hi
sorry to hear about your experiences on the M3. I would have thought that the real reason is the light weight front, that is, in an aluminium car there is less weight pressing on the tyres to...
Hi
You seem to have tripped the TCS tyre ware algorithm. If the difference between the rotation of the front and rear wheels is outside a certain tolerence it disables the TCS. You can easiliy...
Have you flushed the abs?