The owner wanted to have the clock and A/C CCU illumination modified so that the display and the LED indicators stay at max brightness even when the lighting switch was operated. I touched on these long time ago; ...
Updated 19-11-2015 at 04:57 PM by Kaz-kzukNA1
As reported earlier in the following posts, I have been testing the modification on Clock and CCU to disable the dim feature when the light was switched on. CCU Illumination CCU Illumination 02 It will keep the text on the CCU/Clock display and the LED behind the CCU push buttons at the max brightness even when the light switch was operated. Followings are the detail of the modification ...
On going testing of modified setup on Clock and CCU illumination. Under the daylight with the light switched on. This photo was taken when only the clock was modified. ...
While working on MX5 engine, I was looking into the way on how to disable the dim function on the illumination at CCU display (VFD). Can’t remember how it used to be when my NSX was new but as many owners experienced, it is almost impossible to see anything on the display of Clock, CCU and Audio Head Unit during the daylight when the small side light is switched on. As reported earlier in this ...
I always wanted to test this mod but because it was so simple, it was just left at the bottom of the list and never had the chance to do it on my NSX. I think another member here questioned the same thing long time ago. As I had some spare time today, finally decided to try it. It is to disable the illumination ...
Updated 26-09-2014 at 03:56 PM by Kaz-kzukNA1