What a busy schedule over the last 2 weeks! I was so tired after returning the NSX to the owner and then meeting with another owner that I slept continuously over 12Hrs without even waking up last night. With my age approaching 50, seems like taking longer to recover. With the limited time available for working on my own NSX, I can only do major detailing twice a year, in spring and autumn only. ...
After spending hours, finally I was happy to start re-building the rear caliper. Before and after shots of the pin bearing area at the cam lever. Also, the cyl wall is very clean now. ...
After about 6 weeks, finally all the calipers and brackets are back at my place. Normally, Bigg ...
I must admit, I have on purposely selected probably one of the most rusty and corroded calliper/bracket set to test this service and I am really happy with the result. If you are planning to work on your callipers, I would highly recommend using this service. ...
Updated 27-09-2011 at 09:46 AM by Kaz-kzukNA1
I would like to introduce you the new service offered by the brake remanufacturing company – Bigg Red Ltd. It is the Polymer Coating service for the NSX brake calliper and bracket. I would like to say big thank you to Tony and John at Bigg Red for supporting us to establish this new deal and lots of time being spent for the conversation between us. I also would ...
Recent Comments
