It is very unlikely that the engine will be out of the engine bay again for another 10 years so gave a good cleaning inside there. Much easier to replace the fuel filter while the engine is out. Brown coloured ...
This NSX is equipped with the aftermarket test pipe but the fixing bolts and nuts were too loose. It allowed some exhaust gas to escape and left some marking on the gasket. Hope I can re-use this one and tighten the bolt and nut at proper torque. ...
Updated 10-10-2013 at 11:33 AM by Kaz-kzukNA1
Cleaned the engine bay. New fuel filter. Installed. Much easier to deal with this when the ...
As reported earlier, there was no gasket used at the connection points between the test pipe and back box resulting in exhaust gas leakage. Also, there was trace of carbon at the donut gasket at the swivel joint of the header suggesting that it was leaking from both the front and rear joints although I couldn’t feel it at the idle rpm. Initially, I thought I should not install the triangle gaskets ...
Updated 19-05-2013 at 10:48 AM by Kaz-kzukNA1
Although this needs to be replaced again when the owner puts back the CAT, new OEM gasket at the front exh pipe. Forgot to order another one for the rear but as it's going to be short life before putting back the CAT, just squashed the existing one in cross direction to fatten it so that it ...