So, all four wheels back on the car and adjusted the tyre pressure. As the garage was warm and it looks like it is going to be cooler during the week, decided to set it to the OEM 40/33psi pressure setting. And when I thought I was ready to go out for the test driving session, ...
Updated 24-09-2012 at 10:08 AM by Kaz-kzukNA1 (Revised blog category.)
Just a follow up for the last post. Photo of the Goodridege custom made brake line. The replacement master cyl. ...
Nothing new here….. Just keep cleaning the internal and external caliper parts….. Received the caliper and bracket back from Bigg Red. Once again, they had bubbling and running of polymer on a few parts but far better than the last occasion. In fact, you won’t notice them unless you really look for them. ...
Had to shut down myself for a while as I was not well and slept continuously almost 12hours..... I should have known better by now...... Counterproductive when keep working continuously for many weeks...... Now, I’m back. Before warming up the engine for compression ...
Updated 24-09-2012 at 10:07 AM by Kaz-kzukNA1 (Revised blog category.)
So, after everything connected and new header tank and cap installed, started the vacuum leak check on the cooling system. ...
Recent Comments
