ABS upgrade loom installed at the front compartment. The cabin side will be installed later. The small black connector attached to the spare wheel guard is the SCS terminal for the upgraded ...
Forgot to upload the photo of classic ABS came off from this NSX. It was already dead with suspected all four solenoids stuck closed. No ABS at all and just locks up all four wheels yet no ABS warning lights because there is no feedback from the solenoids and thus, the controller can’t detect ...
Updated 25-01-2013 at 01:28 PM by Kaz-kzukNA1
Installed the ABS Upgrade Loom. Secure the GND and SCS terminal nearby. There was another loom already installed for another device so used black sealant to secure all of the looms and seal the grommet slit at the firewall.
Updated 25-04-2011 at 10:34 PM by Kaz-kzukNA1
Recently, I placed an order to KSP Engineering for their ABS upgrade loom. http://kspweb.jp/shopdetail/004008000001/046/001/order/ Today, I received the message from them that they have shipped the looms out. I think it will take a while due to the bad weather we had recently but I hope I’ll receive them at the beginning of January. So, for those who ordered it, it’s on its way now from Japan… Kaz
Updated 24-04-2011 at 11:16 PM by Kaz-kzukNA1