TB tension was not too bad although from what I can see, it was probably adjusted too tight during the last TB service. TB tension adjuster was very rusty. Probably re-used last time and rattling by now. ...
Went out for the test driving session. After basic testing, back to the lift, general checking and happy with the result. Although I didn't touch the engine this time, in order to push out any air bubbles inside the cooling system, went out for the final test driving session with continuous 70mph cruising for about 20min while keeping the CCU setting at 32degC. Not fun at all in this hot weather. Back on the lift and as reported to the owner long time ago, ...
The air cleaner element was placed on top of the bright LED light and although it managed to pass through some lights as in the photo, its too dirty to be re-used so will replace it this time. Compression check. ...
While carrying out the A/C CCU function and operation check, I noticed loud blower like noise under the bonnet with lots of air coming out from somewhere under the motor fan case. This video was recorded without running the engine so you will get some idea on how loud/noisy it was. ...
For the installation of the BC coilover kit, had to remove the rubber seal under the bonnet. As expected, the clips were all dead. Replaced all of them. ...
Updated 08-08-2013 at 09:34 PM by Kaz-kzukNA1