Eng Refresh Stage 1 + LMA

Before/after
Looks better now although the potting will melt again.




Cam pulleys torqued carefully.

...

Tags: cam pulley, cam timing, crk/cyl sensor, cyl/crk sensor, tb tension, tb tension adjuster, tb tension adjuster bolt, tb tensioner

Categories

Eng Refresh Stage 1 + LMA

New crank seal installed and cleaned the area.




...

Tags: cover plate, crank seal, tb back plate, tb cover plate, water pump

Categories

Eng Refresh Stage 1 + LMA

What a busy week…. Didn’t have time updating the blog so doing catch up but kept uploading the photo to the web album so hope the owner was watching them.




The brown cam seals at the rear ...

Tags: cam seal, cam shaft, header tank cover, liquid gasket, tank cover

Categories

Eng Refresh Stage 1 + LMA

After cleaning the cyl head as much as possible, new o-ring under #1 cam holder installed.

Before applying the liquid gasket, the mating surface should be cleaned to this level.


...

Tags: cam disc, cam seal, liquid gasket

Categories

Eng Refresh Stage 1 + LMA

The LMA at the rear bank replaced, rocker shafts and arms back in place after cleaning.

As reported earlier, had to replace both sealing bolts for this bank.



...

Tags: cam disc, cam holder, cam seal, cam shaft, condensation, liquid gasket

Categories

Eng Refresh Stage 1 + LMA