View RSS Feed

Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer

Updates from Kaz-kzukNA1

  1. Eng Refresh 23

    by , 15-03-2014 at 01:42 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    Bleeding of CL Hyd Sys.

    Unlike the brake master cyl that consists of twin piston tandem system with
    criss-cross flow, CL master cyl is just a single piston/line.
    As long as you can prime the master cyl enough, air bleeding is fairly easy
    and can be done with just hand operation.

    After priming the CL master
    ...
  2. CL Hyd Sys 02

    by , 02-07-2012 at 10:54 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)






    Unlike the Brake master cyl, CL one is not that difficult to bleed the air if you know
    the internal valve structure.


    Just prime the master cyl with the pedal down first and then lift the pedal and start pressure bleeding.







    ...
  3. CL Hyd Sys 01

    by , 01-07-2012 at 01:51 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)




    All the extra parts from Japan arrived so from today, I can speed up the process.





    Removed the CL master cyl and even I knew it was already leaking,
    quite surprised to see the amount of fluid held inside the rubber cap
    at such low mileage.

    Not easy to see in this photo but it was
    ...