Hi

I hope someone can give some advice. My NSX hasnÂ’t been used much for a couple or years due to personal circumstances. IÂ’d noticed that it was failing to start first time at least two years ago but thought itÂ’s just the battery getting knackered and lack of use. Over the last couple of weeks IÂ’ve actually manage to go out for few runs and have found I still have the issue either cold or hot.

I run the car on shell v power so donÂ’t think itÂ’s the fuel.

It had new plugs about 3 years ago and has hardly been used since.

IÂ’ve videoed it starting up from cold (several days since starting) which you can see here. https://www.dropbox.com/s/d377n05dgo...%2029.mov?dl=0

It has been serviced by Ben at vtec direct for several years with no issues.

IÂ’d read comments about the master relay but didnÂ’t think this sounded the same. Even so IÂ’ve had that out and re-flowed all the solder joints to be sure. This made no difference.

Can anyone suggest further things I need to check.

Thanks

Phil