Where do people buy nuts from? I’m replacing anti-roll bars and links front & rear. I need 16-off M12 fine self lock flange nuts. 16 x £8 is obviously a bit pricey from HUK!
Where do people buy nuts from? I’m replacing anti-roll bars and links front & rear. I need 16-off M12 fine self lock flange nuts. 16 x £8 is obviously a bit pricey from HUK!
'99 V70r
'98 NSX
If OEM, get them from Japan although you may pay more for the delivery than 8 x nut.
Not sure why you need 16 though if replacing just the sway bar and the link….
Should be less than GBP3 each before leaving Japan.
Many online shops available.
If you go with the aftermarket sway/drop link, the nut is normally included.
By the way, good luck removing these nuts from the link.
Quite often, the HEX hole gets rounded and you end up cutting the link body although you are replacing it anyway so not a problem.
Kaz
Link sheared anyway when installing new suspension.. all rotten, so replacing the lot. You’re right ofcourse on no’s off, front diagram states 8 req’d so just doubled without thinking, but 8 will do all 4 corners. Japan it is then, bit strange not available in U.K., but can’t really trust the quality from most suppliers
how about these..... https://nutsandboltsdirect.co.uk/ind...eel-Zinc-Plate
if that's the pitch you are after...
aka Jonathan!!
'92 charlotte green auto.... as a daily
'37 Ford Y street rod......... something for the weekend!
...... if a photobucket pic is foggy, click it, and it'll take you to the clear version, yes, it's a clicking faff....
EBay ?
https://www.ebay.co.uk/itm/M10-M12-M14-M16-M20-METRIC-FINE-THREAD-HEX-HEAD-FLANGE-NUTS-GRADE-10-GEOMET/183775658094?hash=item2ac9e2006e:m:
12x1.25mm small head flanged nuts £20 for 20
Last edited by duncan; 23-05-2020 at 09:44 PM.
tapav, OEM is dacro-coated.
Kaz