Results 1 to 6 of 6

Thread: OEM Radio - Cassette Belt Replacement

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2018
    Location
    Near Stuttgart, Germany
    Posts
    246
    Blog Entries
    25

    Question OEM Radio - Cassette Belt Replacement

    Hello together,

    Since I was working on my OEM radio I noticed that tape reverse (rewind and all associated functions) was not operating, just auto-reversing instead. The reason for this is a worn-out belt that prevents the tape from moving and triggering auto-reverse (no movement -> end of tape reached). For now I installed a working tape unit from another NSX radio but in parallel the belt should re replaced.

    The question is quite simple: Are there any sources of belt drives for this type of Alpine radio?
    It's a square, 1 mm thick belt with a length of ~425 mm (which is quite unusual). Any information on the actual length or specification would also be very helpful.

    PS: It's all for nostalgic reasons, I'm fully aware of the limitations of cassette tapes :-)
    Last edited by Heineken; 03-12-2019 at 08:11 PM. Reason: Corrected wrong lenth
    1997 JDM Custom Order AT VIN 1400005 - Stock
    Heineken's Garage

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •