Results 1 to 6 of 6

Thread: Bootlid gas strut top fixing. The

  1. #1
    Join Date
    Oct 2008
    Location
    aberdeenshire
    Posts
    30

    Default Bootlid gas strut top fixing. The

    The top fixing for one of my boot struts has disintegrated. The plastic cup is broken and the circlip is missing. Can I get these parts anywhere?
    SGS who re-gassed the strut was unable to help. Any advice welcomed !



  2. #2

    Default

    Ask on NSX Prime ...cheap one from USA

    or

    Ask Austrian Type R (Christian) who I am sure have some in stock.

    SS
    Lexus LC500h.......New Daily run around with some saving the Planet thoughts
    Black/black 95 NSX NA with mk1 Ary exhaust....Now sold
    Red/Black 91 NSX treasure.....FI No more NA
    Silver/Pearl White/Black 1993 NSX 3.0 5 MT NSX ZAZ R-GT Twin Scroll Turbo

  3. #3

    Default

    Lexus LC500h.......New Daily run around with some saving the Planet thoughts
    Black/black 95 NSX NA with mk1 Ary exhaust....Now sold
    Red/Black 91 NSX treasure.....FI No more NA
    Silver/Pearl White/Black 1993 NSX 3.0 5 MT NSX ZAZ R-GT Twin Scroll Turbo

  4. #4

    Default

    Lexus LC500h.......New Daily run around with some saving the Planet thoughts
    Black/black 95 NSX NA with mk1 Ary exhaust....Now sold
    Red/Black 91 NSX treasure.....FI No more NA
    Silver/Pearl White/Black 1993 NSX 3.0 5 MT NSX ZAZ R-GT Twin Scroll Turbo

  5. Default

    Replacement boot struts are available through Honda, the main challenge is removing the bottom ball nut from the old strut. Some shipping companies don't like high pressure struts.
    Mike

  6. #6
    Join Date
    Sep 2008
    Location
    Bucks, UK
    Posts
    2,230
    Blog Entries
    2683

    Default


    Just quick post as focusing on typhoon situation back in Japan.
    @sunday driver, can't see whatever the file/photo/etc in your OP.
    Please upload again after reviewing the file size, pixel condition, etc depending on the file type.

    Were you referring to the oval marked plastic parts that wraps around the L-side gas strut body?
    If so, it's part of the loom.

    Or, were you referring to the rose joint/rose end bearing that sits inside the top fixing tab?

    If so, it's part of the gas strut itself and not sold separately.
    While you may be able to repair/replace it, the bearing is damaged so best replacing the whole strut body.

    The C-ring or E-ring is 90755-SB2-000.

    Kaz
    Last edited by Kaz-kzukNA1; 13-10-2019 at 09:58 AM. Reason: additional info

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •