What kind of airfilter has been used in the past?
What kind of airfilter has been used in the past?
Hi Goldnsx, now and in the last 30.000 kms the original Oem filter, in the previous 90,000 km I do not know...
these are more the remains of oil and residue in the admission bucket and admission butterflies
also, very dirty one of the filters
when I started to disassemble the injectors, and first of all, just moving them, started to lose gasoline by the top of the injectors, the rubbers are damaged and in poor condition
I am already cleaning everything, changing new joints and I have taken to clean the injectors
I will keep you informed
NSX 93 conversion NSX-R 02
Ups, lucky you, the o-rings of the fuel injectors look to be the first ones. I change mine every 10 years or so. High recommended for anybody out there.
Those metal bits don’t look to good.
What is that you’ve picked up???
Pride.
1992 My beloved Red/Black manual NA1.😎
1992 Chevy Lumina apv Rockford Fosgate sound system demo van.🙉
2003 Hartge Mini Cooper S (2 x UK & 1 x European sound quality finals winner) 🏆
"The NSX's greatest victory was to WIN the 1995 Le Mans 24hr GT2 Class"
..............and guess what, it was a RED one but of course.
There's a lot more coking up in your inlet than mine. I think in this case, a wise decision to strip the parts down for a major overhaul. I'd get your injectors professionally checked out, if they're in that condition. Hopefully I'll get my cam covers back for the easter break and with a bit of luck, even get the car back up and running.
Wix
Hi Pride, there are no metal parts, it's just a lot of dirt and deposits of oil and oil clumps.
I am again assembling everything, it will be ready in a couple of days, with all the new gaskets
the injectors have cleaned them inside and also outside with ultrasound, the rust has disappeared, it seems that two of them did not work well
When everything is ready and I will drive again, I will tell you if there has been improvement
Remi
NSX 93 conversion NSX-R 02
Hi Wix,
Reminds of one of my past winter refresh projects ... I took all the front compartment brackets out, prepared them and then had them all powder coated in an aluminuim finish ... very rewarding work when its all done ... oh, and keep the faith as the weather is bound to break by June
regards, Paul
Senninha
'Too many manufacturers today are obsessed with lap times and power outputs at the expense of emotion and fun' Colin Goodwin
S2 is signed by the NSX Project Leader Shigeru Uehara
Cam covers & Plenum cover back from having a nice new coat of crackle finish applied.
Really pleased with the finish. Had them done here,
http://www.redditchshotblasting.co.uk/contact/
only need the new coil packs to arrive and the car is ready to have the last few things put back together and it'll be back on the road, hopefully in a week or two.
Wix