Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: NSX-R Recaro Pole Postion ABE! - Group buy - A.S. Motorsport

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default NSX-R Recaro Pole Postion ABE! - Group buy - A.S. Motorsport

    Hello,

    We're very please to announce we have finally managed to be able to have Recaro make NSX-R style seats based on the Pole Position ABE shell.
    These will come as picture below just as in a NSX-R 2002-2005 without the OE price tag for kevlar shells.

    Important to note,
    These will use the same OE special outer fabric as the real NSX-R.
    Made in Germany by Recaro them-self specifically for us - so no replica or knock-off item the real deal made by the factory.

    We are now organizing a group buy to bring the cost down.
    Minimum would be 5 pairs with no maximum.

    The material is custom order and they need to be hand made at a special line in the Recaro factory in Germany,
    Lead time as of now roughly 10 weeks after GB closes.

    1. john_staxx
    2.
    3.
    4.
    5.


    Pricing:

    €1250 per seat - €2500 per pair

    Shipping Europe, €25-75 typically, please contact
    Shipping Asia, please ask 200-400 typically.


    For anyone near our shop, or willing to drive free install.

    OPTIONS:
    Carbon fiber shell (not kevlar) €1075 per seat, €2150 for the pair

    We can laminate the FPR shells in the correct kevlar, please ask for a specific quote.

    PAYMENT:
    We accept;
    - PayPal (fee's apply, 3.9%)
    - Bank Transfer (please cover bank fee's IF applicable)
    - Cash at our shop (sales taxes applies)

    Deposit required!:
    - 33% upon sign up
    - 33% when the GB close and production is locked in.
    - 34% prior to shipping

    Pricing in EURO, exchange rates vary constantly at time of posting c.a. $1.07 for each Euro
    Shipping cost subject to your postal code, above listed are indications.

    FOR EU buyers, if your buying as a private person, 21% tax applies - Company sales are tax exempt-
    Adnan @ A.S. Motorsport
    www.AS-Motorsport.com
    Info@AS-Motorsport.com
    Aftermarket, OEM & Used NSX parts.

    Biggest NSX Specialist in Europe!


  2. #2

    Default

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	gallery_83798_38466_1367651.jpg 
Views:	391 
Size:	82.5 KB 
ID:	12596  
    Adnan @ A.S. Motorsport
    www.AS-Motorsport.com
    Info@AS-Motorsport.com
    Aftermarket, OEM & Used NSX parts.

    Biggest NSX Specialist in Europe!


  3. #3

    Default

    Hi Adnan

    what about the seat rails required to fit these seats ... what is the requirement and availability of these and how much extra on top of the price of the seats quoted above?
    "The value of life can be measured by how many times you soul has been deeply stirred" - Soichiro Honda

  4. #4

    Default

    Quote Originally Posted by nobby View Post
    Hi Adnan

    what about the seat rails required to fit these seats ... what is the requirement and availability of these and how much extra on top of the price of the seats quoted above?
    Any NSX rail designed around the Recaro seats will work, for example SoS rails.
    We are busy on designing cnc machined rails specifically to optimize Recaro's in the NSX yet this project is still in early stages.
    Adnan @ A.S. Motorsport
    www.AS-Motorsport.com
    Info@AS-Motorsport.com
    Aftermarket, OEM & Used NSX parts.

    Biggest NSX Specialist in Europe!


  5. #5

    Default

    As this would be a special order from Recaro would it be possible to get them to make the seats with the NSX-R shells?
    I can't see the manufacturing cost would be any different, possibly a supply contract issue?
    I have tried the Pole positions and find them a bit too tight for my non athletic physique but the downforce replica is definetly a more comfortable fit and I believe this to be identical to the R seats?

  6. #6

    Default

    Quote Originally Posted by lotusolly View Post
    As this would be a special order from Recaro would it be possible to get them to make the seats with the NSX-R shells?
    I can't see the manufacturing cost would be any different, possibly a supply contract issue?
    I have tried the Pole positions and find them a bit too tight for my non athletic physique but the downforce replica is definetly a more comfortable fit and I believe this to be identical to the R seats?

    Well getting Recaro this far was a job since the NSX-R seat is licensed to Honda, the shell is pretty much out of the question.
    That being said, NSX-R seats can sit quite tight, they are narrower than PP ABE or FIA shells as they are desigend for Japan.

    When you install a genuine NSX-R seat in a euro/usa made rail you'll even need spacers, visa-versa a TaiTec and RFY JDM rail doesn't fit a euro/usa spec Recaro well and would need widening.
    For those of us that are perhaps not as athletic the Pole Postition ABE is by far the best choice
    Adnan @ A.S. Motorsport
    www.AS-Motorsport.com
    Info@AS-Motorsport.com
    Aftermarket, OEM & Used NSX parts.

    Biggest NSX Specialist in Europe!


  7. #7

    Default

    Quote Originally Posted by A.S. Motorsport View Post
    Hello,

    We're very please to announce we have finally managed to be able to have Recaro make NSX-R style seats based on the Pole Position ABE shell.
    These will come as picture below just as in a NSX-R 2002-2005 without the OE price tag for kevlar shells.

    Important to note,
    These will use the same OE special outer fabric as the real NSX-R.
    Made in Germany by Recaro them-self specifically for us - so no replica or knock-off item the real deal made by the factory.

    We are now organizing a group buy to bring the cost down.
    Minimum would be 5 pairs with no maximum.

    The material is custom order and they need to be hand made at a special line in the Recaro factory in Germany,
    Lead time as of now roughly 10 weeks after GB closes.

    1. john_staxx
    2.
    3.
    4.
    5.


    Pricing:

    €1250 per seat - €2500 per pair

    Shipping Europe, €25-75 typically, please contact
    Shipping Asia, please ask 200-400 typically.


    For anyone near our shop, or willing to drive free install.

    OPTIONS:
    Carbon fiber shell (not kevlar) €1075 per seat, €2150 for the pair

    We can laminate the FPR shells in the correct kevlar, please ask for a specific quote.

    PAYMENT:
    We accept;
    - PayPal (fee's apply, 3.9%)
    - Bank Transfer (please cover bank fee's IF applicable)
    - Cash at our shop (sales taxes applies)

    Deposit required!:
    - 33% upon sign up
    - 33% when the GB close and production is locked in.
    - 34% prior to shipping

    Pricing in EURO, exchange rates vary constantly at time of posting c.a. $1.07 for each Euro
    Shipping cost subject to your postal code, above listed are indications.

    FOR EU buyers, if your buying as a private person, 21% tax applies - Company sales are tax exempt-
    Hi

    I would like to put my name down please.

    Regards

    Russell

  8. #8

    Default

    I would like to talk with someone from AS Motorsport about getting covers for my Type-R l/s, drivers seat, US car. I’ve seen “Recaro” bolster cover / pads for the seat bottoms for the Type-R seat. I’d also like to find two in black. Could anyone help, please?

    Cheers
    nigel
    Last edited by nigel; 09-07-2021 at 01:47 AM.

  9. #9

    Default

    Still trying to get ahold of anyone from AS Motorsport for some much needed NSX and Recaro bits. Been trying AS Motorsport@gmail.com and no luck except for some engine swap info but none for the NSX.
    Any help needed.

    Cheers
    nigel

  10. #10
    Join Date
    Sep 2008
    Location
    Bucks, UK
    Posts
    2,231
    Blog Entries
    2683

    Default

    Not sure why it's that difficult in this era.
    May be there is un-known reason that is preventing the communication???

    Tried the phone?
    These days, using any app would make the international call free or really cheap and the different time zone should not be much of a problem.

    Tried their standard email address info@as-motorsport.com ?
    I could forward another one to your email address if it doesn't work.

    They are fairly active on FB and I 'think' I even saw somewhere on FB group about sending the Recaro seat to US owner.

    I don't know if you use FB but if not and if you want to, I could just send a message once to them telling that you are trying to get in touch and leave the rest to you.

    Or, since I know your email address, if you are happy to do so, I can forward it to them and then leave the rest.


    Kaz

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •