The factory coil packs are made from stone and flint, in the world of technology they are very old.
I have been searching for years to find an upgraded aftermarket coil packs, up until recently no...
Type: Posts; User: jaffaz32; Keyword(s):
The factory coil packs are made from stone and flint, in the world of technology they are very old.
I have been searching for years to find an upgraded aftermarket coil packs, up until recently no...
They did, easily pleased me haha.
Thanks.
I just want to add also
Anyone else planning on building an engine and speccing out a motor one thing that is always overlooked is the piston size.
Most people think bigger is better, this is...
Brian Crower crank shaft, 99% of guys run with the stock crank but i decided to go for a 3.4 stroker build. This will improve overall torque, improve lag and make the engine more lively out of...
I have a set of forged low comp pistons if interested along with gaskets.
see post No. 15 of my build thread http://www.nsxcb.co.uk/showthread.php?13981-Jaffaz32-s-Boosted-Stroker-Build/page2
The oil pressure gauge on the dash uses a oil pressure sensor which is off the...
They are, they fit well and they feel great but that being said my axles didn't go over night, got worse and worse so anything would feel good in comparison.
They are well made.
I do have a...
Yeah i know... Few more parts i need and the rate has really pushed the prices up.
Brian Crower forged connecting rods. Not many guys upgrade the rods as the factory ones are titanium. Rods only tend to be upgraded for power levels over 550bhp.
12711
ARP bolts installed in...
The screen is great but it's not as bright or visible as a gauge. Although you have the ability to add any information from the ecu you like you are limited to the size of the screen, you just can't...
Science of speed, they offer a screen as an kit for the Nav Pod. I also recommend the metal bracket to keep it in place.
When increasing power you put more strain on other parts of the car which also need to be upgraded, when guys talk about breaking drive shafts 9/10 they mean the knuckle (join) breaks up. Inside...
If you have a aftermarket ecu with lots of additional sensors and would like to be able to monitor all of the sensors on a screen GaugeArt will allow you to do this without the need for 100's of...
Really is that so? That's interesting.
There is some adjustments to be made in the heads, have you had these checked and dialed in?
Cody @ LoveFab sells his kit as DIY but most people overlook the ecu and the tune, it is one of the most important parts of any build, you can have the best spec motor but if the tune is not up to...
I often get asked what engine management i am running, On 1991-1994 you could replace the factory ecu with an AEM EMS Series 1/2 however anything after 1994 you had to piggyback which means you have...
that's good input, i will let you know if i experience the same sound.
Maybe that's a sign to supercharge it ;)
Darton Sleeves, when building a motor for Forced induction there is only so far you can go power wise regardless of what you have replaced pistons, rods etc. Sleeves are required to take you to the...
ACL big end bearings, we are using Honda main bearings.
12694
Science of Speed Lost Motion Assembly (LMA) upgrade kit, these were upgraded by Honda in later Nsx's as the original design...
Thanks :).
I will keep the info coming and updates coming, the end results should be very interesting.
I've took a different approach, i've not spec'd the engine to ran X amount of power. I...
Ferrea forged oversized valves, the C30A has 1mm smaller valves than the C32B, i believe from memory it's only on the intake side.
12692
Brian Crower Springs, Retainers and Seats. I chose...
Cedar Ridge cam pulley upgrade, the factory pulley is spring loaded and has been known to fail, this is a fixed solution.
12690
Power Enterprise timing belt, just a stronger belt that oem.
...
Cometic metal head gaskets, the early cars had a weak gasket and is the limiting factor when turbo charging the factory engine, later models had metal gaskets from factory and is one of the reasons...
Science of Speed refurbished oil pump with billet oversized gear, they replace all the seals and machine the factory oem pump to accept a bigger billet gear than provides more oil pressure. The...
Science of Speed EGR blank kit, only compatible with aftermarket engine management.
12682
Science of Speed Oil pressure gauge upgrade kit for the oem gauge on dash. Apparently resolving the...