BC Racing, BR Series, 10Kg springs front and rear. I'm very impressed with the quality of them after fitting them to 1990 Prelude last year and a mate has them on his S2K and he raves about them.Quote:
Originally Posted by Pride
Printable View
BC Racing, BR Series, 10Kg springs front and rear. I'm very impressed with the quality of them after fitting them to 1990 Prelude last year and a mate has them on his S2K and he raves about them.Quote:
Originally Posted by Pride
I should have recognised them.Quote:
Originally Posted by wixer
Good choice.👍
I had those exact make and model installed to my NA1 about 18 months ago, I initially had an occasional slight knocking noise from the left front but after a couple of months use the noise disappeared.
Also had to have them on almost maximum ride height adjustment for acceptable clearance over undulating roads but very well worth doing I must say.
I wish I'd cleaned my suspension and underbody as thourghly as yours though.👌😎
Attachment 12921
Had a slight leak from drive shaft seal.
Attachment 12922
Attachment 12923
Attachment 12924
New seal almost in.
Attachment 12925
A mate made me a seal tool using his 3D printer and the end off a broom handle, worked a treat and I used the old seal to contact the new seal.
Attachment 12926
Removed the inner boot to tap shaft back into the diff and found the grease was like suds, so re-packed it with fresh grease and filled gearbox up with MTF3.
Attachment 12927
New bolts for oil cooler arrived from Japan this week, only took 10 days from when I ordered them, so RH rear upper arm could go back on.
Attachment 12928
Rear BC coilers now fitted
Attachment 12929
and anti-roll bar.
Attachment 12930
Started to refill coolant, waiting for another 10 litres to arrive.
Attachment 12943
Exhaust now modified with valves, just need to plumb the vacuum parts up.
Attachment 12944
Attachment 12945
Test pipes made, in place of CATs.
Attachment 12946
Attachment 12947
Discs back from being re-ground.
Attachment 12948
Car back on ground after 6 months, just waiting for my new wheels to arrive, hopefully this week, then ride height can be adjusted, before the trip to Centre Gravity for alignment. MOT on Thursday, so should be road legal at the end of the week, FINALLY !!!
Which wheels (& tyres) have you selected?
Having some of these https://www.driftworks.com/work-wheels-emotion-t7r.html
17in front 18in rear, mainly due to the fact that Work wheels offer bespoke offsets, where most other aftermarket brands, don't.
They should look pretty good. What colour?
Matte Gunmetal, black centres.