-
-
-
To clean the aspirator, I used combination of Pressure Air, Meguiars cleaning swabs and micro fibre cloth for lifting static debris
http://i77.photobucket.com/albums/j7...X/SAM_0326.jpg
http://i77.photobucket.com/albums/j7...X/SAM_0328.jpg
-
With the console out I noticed tracking of the LED Alarm light was not great and was visible from the passanger side hanging below the centre tunnel.
http://i77.photobucket.com/albums/j7...X/SAM_0308.jpg
http://i77.photobucket.com/albums/j7...X/SAM_0309.jpg
I tidied this up and tracked the wire inside the tunnel, away from the hand brake mechanism and tucked into the console retaining bracket.
http://i77.photobucket.com/albums/j7...X/SAM_0330.jpg
http://i77.photobucket.com/albums/j7...X/SAM_0331.jpg
-
-
-
http://i77.photobucket.com/albums/j7...X/SAM_0343.jpg
I found that there was a strange noise coming for drivers side window, not the usual pop or crunch from a window being out of line but a funny dragging and banging. [Hard to explain]
So with the door card removed, I immediately noticed the cable.socket for the wing mirror was hanging free and the window would catch this on opening and closing
http://i77.photobucket.com/albums/j7...X/SAM_0354.jpg
After inspection, it was clear to see the socket was damage and the retainer that hold the socket to the door cannot be used to secure it. Also someone tried to mask it up at one stage.
http://i77.photobucket.com/albums/j7...X/SAM_0359.jpg
http://i77.photobucket.com/albums/j7...X/SAM_0360.jpg
-
Masking removed
http://i77.photobucket.com/albums/j7...X/SAM_0363.jpg
With the tape duct removed, I didnt have much options to secure the plug without changing it. So I covered the plug in sound deadning so it wouldnt rattle or scuff the door, then used a tie wrap to secure it tightly against the door out of the windows travel.
http://i77.photobucket.com/albums/j7...X/SAM_0364.jpg
http://i77.photobucket.com/albums/j7...X/SAM_0366.jpg
Nice and Snug now and no more nasty sounds!
-
-