View RSS Feed

Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background

'Send Email' feature issue

Rate this Entry







Still testing but please note that there is high chance that the 'Send Email' feature through this Forum may not work properly.
Unfortunately, even if it may look successfully sent, it's not and there is no failure notification.

PM seemed to be still working fine.

Once the test has completed, I'll ask forumadmin to reset the server as the initial attempt to fix this but in longer term, software upgrade is better.

In the meantime, if you want contacting me, please send email using your own email software outside of this forum or contact me over the phone.
If you don't have my main email address, please send it to

kaznsxcb-002 'at' yahoo 'dot' co 'dot' jp

(one word, without space, please note the domain ends with jp and not uk) as per 'Contact detail' in the right side window.


Thank you.

Regards,
Kaz

Comments

  1. Kaz-kzukNA1's Avatar
    Surprise, surprise…..
    In the background, the administrators and forumadmin were discussing about this issue and I even proposed to have the server reset but all of a sudden, the server decided to start working and this morning, many of us received 10s, 100s of email, notifications, etc, etc….

    Probably some of you received the Platinum expiry reminder, etc as well.

    Forumadmin did nothing on the server so if this was just coincidence, it’s a one in million chances.


    I can confirm that the 'Send Email' feature was not working at least from Oct/16 and possibly even before.

    I'm in the process of slowly replying back to 10s of email sent from you so hope you will get my reply soon….
    We are still discussing about the software upgrade and possible reset in the future.

    In the meantime, if you sent email but didn't receive my reply, please use your own email software and send it to the address mentioned in the main thread above.


    Just tested the 'Send Email' feature again and for now, it's working.
    Please note that the 'Image Verification' is still not working and very likely to be module being too old....


    Thank you.


    Kaz
    Updated 17-02-2017 at 02:05 PM by Kaz-kzukNA1 (additional info)