TB/WP/Valve 07
by
, 05-05-2011 at 10:02 AM (2311 Views)
Time to wash the very dirty valve covers, TB Front/Rear covers and install the new gasket on them including the TB lower cover and IGN Coil cover.
This will allow liquid gasket to cure well before the re-assembly process.
As reported earlier, the fixing nuts for the valve covers were very loose and the gaskets/seals were not replaced during the last TB service.
This resulted in lots of oil seepage making the valve cover very dirty.
Some of the Before and After shots of cleaning process.
More to follow.