View RSS Feed

Recent Blogs Posts

  1. Cooling Sys, etc 01

    by , 20-04-2021 at 09:00 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)







    Had been servicing another NSX for several months and just returned it to the owner.

    Will back date all the blog entries to 20/Apr.

    Due to pandemic situation, initially, the plan was to just carry out cooling system refresh and replace the aged crank pulley.

    However, never serviced this NSX before and found several things to be sorted at high priority.

    After discussing with the owner,
    ...

    Updated 03-05-2021 at 03:00 PM by Kaz-kzukNA1

    Categories
    Health Check Service , Clutch Master/Slave Cyl
  2. Recent Service 03

    by , 24-05-2020 at 09:02 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)
  3. Recent Service 02

    by , 24-05-2020 at 09:01 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)














    As most of us couldn't drive regularly until recently, please double check the state of your tyre before start driving.




    ...

    Updated 13-06-2020 at 12:45 PM by Kaz-kzukNA1

    Categories
    Engine/Tyre , Clutch Master/Slave Cyl
  4. Eng Refresh, Health Check, etc 30

    by , 13-03-2020 at 10:33 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)














    ...

    Updated 16-03-2020 at 11:15 PM by Kaz-kzukNA1 (Back dated to actual timeline of 13/Mar/20.)

    Categories
    Eng Refresh Stage 1 + LMA , Cooling , Clutch Master/Slave Cyl , Clutch
  5. Eng Refresh, Health Check, etc 01

    by , 30-12-2019 at 07:58 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)









    Have been servicing another NSX for a while.
    This one was already at my place since Jun/Jul time but due to the massive extra service time (over 6 months) required for the last NSX
    plus the loss of family, only just managed to start focusing on this one recently.

    Several years ago, there was specific request from the owner and agreement exchanged but unfortunately, because of the above reason,
    ...
Page 1 of 7 123 ... LastLast