...
The existing thermostat lost 2/3 of its rubber seal allowing the coolant to pass through during the warm up. No wonder why it took ages to warm up in March. ...
The owner is already aware of this but there was air or debris trapped at the centre upper section of the front valve cover. Also, at the front valve cover, there was straight line showing ...
Torqued the crank pulley bolt to the spec and installed the ACG with the new belt. All coolant hoses around ...
The owner wanted me to take a look at the cabin noise. One of the cause was the rattling boxes and wires behind the centre console around the heater unit. Normally, I’m quite happy to disconnect any connectors and re-rote the cables but as these could be for the security devices, it is too risky for me to just start disconnecting any of the connectors without knowing the system architecture or wiring diagram. ...