...
Double checked that the brown cam seals are pushed into the correct position. Several years ago when I injured my back, even after visually checking the position of this seal, I made mistake resulting in oil seepage so since then, taking photos for better inspection method. ...
The TB drive pulley looked to be rusty as well. I have ordered new one just in case. Having really big time trying to remove the bolts at the heat shield. Always the ones at the rear bank will cause ...
Although the compression imbalance between each cyl and lower compression at the rear bank looked to be caused by the poor valve clearance adjustment and loose TB tension, carried out leakdown check as pre-caution. All six cyl showed only 2 - 3% leakage which is normal so happy with the result. ...
Updated 03-09-2013 at 02:05 PM by Kaz-kzukNA1
TB removed. The area behind the TB drive pulley was very clean. This photo was taken before cleaning anything. The crank oil seal was also very clean so no need to replace. WP removed. Looks very clean in the photo but …. It was already making small noise from the bearing. ...
Updated 23-04-2011 at 11:12 PM by Kaz-kzukNA1