The owner wanted me to take a look at the cabin noise. One of the cause was the rattling boxes and wires behind the centre console around the heater unit. Normally, I’m quite happy to disconnect any connectors and re-rote the cables but as these could be for the security devices, it is too risky for me to just start disconnecting any of the connectors without knowing the system architecture or wiring diagram. ...
Although the owner was not feeling any issues on his A/C system, he decided to carry out the preventative measures on the CCU. Very good decision by acting now instead of waiting for something to fail as it will save the time and cost for the owner. The light green circuit board material with brown capacitor ...
Went out for the 1st test driving session for the general checks. Happy with the result so back on the lift, visual inspection, re-torque the wheel nut, adjust the Aux belts tension, etc and checked the base idle rpm. This is the DBW model so needs to short the 2pin Blue SCS terminal before ...