Pin hole damage at the RR upper ball joint boot. Grease is leaking but no play at the ball joint and considering how difficult it is to separate this joint, not worth replacing the boot at ...
Updated 26-09-2014 at 03:37 PM by Kaz-kzukNA1
Was planning to attend the Donington Historic event this weekend but with so many things to be done at the moment and my boss flying back from Japan on Wednesday, decided to work on the eng through the Bank holiday weekend. Sad...... Regardless of whether you have NA1 or NA2 engine, it is always ...
The parking brake cable was stuck inside the L-shaped bracket on the brake caliper. And the two bolts holding this bracket were heavily corroded so I had to be really careful not to sear them off. I’ll replace them with the new one on installation. If I have the time, will try separating the cable from the bracket ...
Updated 14-04-2014 at 10:53 AM by Kaz-kzukNA1 (Added parking brake cable photo.)
Doing bit of catch up updating the blog as I have been not well recently but couldn’t take break due to other projects. So, the engine is out. ...
Updated 10-04-2013 at 10:26 AM by Kaz-kzukNA1