New coolant hoses and cramps installed at the centre floor section and at the front compartment under the bonnet. ...
I thought it's going to be an easy life this week since I won't be working on another NSX until next week. Then, something came to my mind and suddenly I found myself placing the order for the front brake disc/pad and started disassembling the calipers.... My boss was not impressed at all as it's her birthday very soon and we were supposed to be doing some shopping..... Moving on..... Ideally, I wanted to send the caliper and bracket to Bigg ...
As reported earlier, caliper pistons were in very poor condition. Only one of them could be re-used and other five had to be replaced with new ones. Parts for the front OH and addition to these, other chemicals are going to be used. ...
Updated 28-11-2013 at 12:40 PM by Kaz-kzukNA1
Nothing new here….. Just keep cleaning the internal and external caliper parts….. Received the caliper and bracket back from Bigg Red. Once again, they had bubbling and running of polymer on a few parts but far better than the last occasion. In fact, you won’t notice them unless you really look for them. ...
After spending hours, finally I was happy to start re-building the rear caliper. Before and after shots of the pin bearing area at the cam lever. Also, the cyl wall is very clean now. ...