Although some of the brake calliper parts looked to be replaced in the past, the fluid was not replaced regularly and also some of the services were not done properly that the rust managed to penetrate through several areas. This smaller piston looked to be replaced in the past so I'll re-use it. Bigg Red has done great job on the calliper and bracket body ...
The CL release fork pocket was completely dry and causing metallic squeaking noise when the CL pedal was operated. High temp Urea grease applied before installing the CL slave cyl. Another reason why I always recommend ...
Long time ago, I introduced Bigg Red for having one’s brake calliper and bracket polymer coated in various colours. http://www.nsxcb.co.uk/entry.php?381...ing-Service-01 After many satisfied results, suddenly, they started experiencing issues such as bubbling, blobs only with NSX callipers despite using the same polymer from the same container that ended with great result on other callipers. Being as perfectionists, they ...
Back to the other NSX on the lift at my place…… I already knew the CL master cyl was leaking so decided to replace the CL master/slave/hose as a set. The owner had majority of the parts except for the master cyl, the fixing bolts, etc but then I found the NA1 Type-R CL pedal together with the damper-less joint. There was also ...
Pressure bleeding the brake fluid. As the owner must replace the rear brake pad, decided to set the fluid level like this on purposely as someone must wind back the rear piston in order to install the new pads and I don’t want to see ...