The 1st gen ancient classic ABS out of the car. Cleaned the area where the classic ABS came out. ...
Started to work on another NSX from around Thursday this week. The service menu is to upgrade the 1st gen ABS to the latest spec, refresh the door window system, etc. As I’m not going to touch the eng, gbox, suspension, brake calliper, etc during this service, only carried out brief test driving session before start removing any parts. Some feedback to the owner. 1. Suspension ...
Updated 30-05-2015 at 12:06 PM by Kaz-kzukNA1 (extra info)
Have been using this dash/drive cam HP f520g for a while now but one thing I didn’t like was the use of the power adaptor through the cigarette lighter socket. Doesn’t look nice when you see a single wire hanging down from around the rear view mirror and if I want to use my mobile phone as the sat nav, it consumes quite lot of power ...
In the process of cleaning my spare Rear AMP board. Removed all of the old hot melting glue and cleaned the surface as much as possible. Both AMPs being refurbished and hot ...
Wanted to finish refurbishing the Bose AMP for the owner outside of UK by the Bank holiday weekend but unfortunately, with severe damages to one of the circuit board, several delays on NSX servicing and another project with irregular time table for the weekend resulted in limited time working on the boards as well as extra time ...