Spent extra hours cleaning the engine due to red sealant all over the place and black blowby mist. Considering the weather forecast, applied extra fresh oil mist everywhere including behind the ...
Torque check of head bolt. None of them moved on this engine. Removed the dirty black ...
Spent hours just for cleaning the outside of the engine. I don’t want to remove the valve covers without cleaning the surrounding area first so this process is a must regardless of whether I’m taking the engine out of the bay or not. As always, there were lots and lots of leaves inside the V-bank area around the INJ port. ...
Lots of corrosion at the coolant pipes but far better than some of the NSX that I serviced in the past. Not so good news at the thermostat housing though..... I think there was slow leakage from here. ...
TB installed and tensioned to the spec. ...