No need to use the GND ring for two pole horn button but kept it in place in case the owner replaces it with higher quality one in the future. If using the single pole type like the OEM expensive one, please connect the black female terminal to the tab of this GND ring like in above photo. ...
By the way, the battery cable cramp was in very poor condition on both the negative and positive sides. I will try to polish the internal wall later. The GND cable was sharply bent and already very loose with someone ...
Since the spline of the drive shaft outboard joint doesn't want to come out from the hub, I'm turning the wheel 90deg every few hours and keep applying the ATF/Accetone in a hope to one day, it will pop out using the hydraulic puller. So far, I managed to push it out using this method even for the toughest one without using any sorts of air hammering tool and I do ...