View RSS Feed

Recent Blogs Posts

  1. Front Lip Spoiler difference

    by , 11-04-2016 at 07:53 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)




    From time to time, I've been asked to order the front lip spoiler from the owners and one of the faq is the difference between the original (-000) and the later (-003) design of the spoiler on the popup models.
    As mentioned several times on here, you can no longer order the -000 original spec and only -003 is available.


    The one on the car is the original design -000.
    The new one sitting below is the later spec -003.
    ...
    Categories
    Parts
  2. Final Touch 03

    by , 05-02-2014 at 10:37 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    As expected, took ages to remove the existing heavily corroded bolt
    and spring nut at the front lip spoiler.




    Replaced all 13 set with new ones.

    When this NSX arrived at my place, the left side of the spoiler was
    just flapping and hanging around as it was not held by anything.



    ...
  3. Final Touch 01

    by , 05-02-2014 at 03:42 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)








    Everything back in place, pressure bled the brake system,
    staked the spindle nut and kept the car on the
    ...
  4. Interior noise 07

    by , 24-07-2013 at 10:27 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    With the recent heatwave, my partially broken camera decided to
    go on holiday and erased the header info of all of the photos that
    I took for the last several hours so looks like I need to format the
    memory card..... Great.....


    So, no photos for some of the items that I tried to show the
    before/after comparison.



    Removed the tiny narrow frame around the rear view mirror and
    planted tiny felt wool
    ...