Didn't like the state of the boot lid height alignment so removed the non-OEM spacers and adjusted it as much as possible. ...
Updated 10-01-2015 at 01:00 AM by Kaz-kzukNA1
...
After cleaning the inside of valve cover, always replace the valve cover gasket, dust seal and IG coil hole seal as a set. If you order the proper kit, it also contains the metal/rubber disc washers that must be replaced every time when the fixing nuts were removed. ...
Updated 19-09-2013 at 11:18 AM by Kaz-kzukNA1
After bleeding the brake, went out for the test driving session. This is the first time I used SoS LMA so paid extra attention at lower rpm range although the test pipe and back box were so loud that it eliminated almost all of the sound above 1,500rpm. SoS LMA sounded bit different at idle rpm but probably that’s just my ear as I knew it’s not exactly the same one as the latest OEM one. Happy with the ...