View RSS Feed

Recent Blogs Posts

  1. Final Touch

    by , 21-11-2017 at 10:37 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)

















    ...

    Updated 22-11-2017 at 12:55 PM by Kaz-kzukNA1 (back dated to reflect the actual date.)

    Categories
    Fuel and Emissions , Brake , Personal View/Self Talk
  2. Brake OH 02

    by , 13-07-2014 at 10:04 AM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    Pressure bleed the brake system.
    As I didn't have to overhaul the master cyl this time, there was no need to empty it so fairly straight forward process.

    Addition to the later spec brake caliper and bracket, I already
    ...
    Categories
    Brake
  3. Eng Refresh 23

    by , 15-03-2014 at 01:42 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    Bleeding of CL Hyd Sys.

    Unlike the brake master cyl that consists of twin piston tandem system with
    criss-cross flow, CL master cyl is just a single piston/line.
    As long as you can prime the master cyl enough, air bleeding is fairly easy
    and can be done with just hand operation.

    After priming the CL master
    ...
  4. Eng Refresh Stage 1 + LMA (SoS) – 21

    by , 18-05-2013 at 10:37 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)








    I just didn’t feel comfortable re-using the heavily corroded
    brake banjo bolt and bleeder plug at the rear calipers so
    decided to replace them.







    Looks much ...
  5. Eng Refresh Stage 1 - 21

    by , 03-06-2012 at 10:58 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)








    Dressed the engine bay.
    Looks nice especially after painting the valve covers.




    ...

    Updated 03-06-2012 at 11:20 PM by Kaz-kzukNA1

    Categories
    TB/WP/Valve Service