After spending hours, finally I was happy to start re-building the rear caliper. Before and after shots of the pin bearing area at the cam lever. Also, the cyl wall is very clean now. ...
Started the day with cleaning of parking brake mechanism at the rear calipers. Spent hours until I felt no friction at all at the pin bearing. I’ll carry out one more cleaning session tomorrow before start rebuilding the rear calipers. Cleaned the cyl wall to this level at ...
After about 6 weeks, finally all the calipers and brackets are back at my place. Normally, Bigg ...
What a hot day to test the A/C CCU board using my NSX…… Any way, everything went smoothly and the board passed all of my testing scenarios including the Function and Operation checks and Self Diag test. This won’t tell you about the board failure but important to confirm the sensor inputs and actuator outputs so that if the board didn’t work on the owner’s NSX after the service, that means there ...
During Silverstone Classic, another owner handed me his CCU board for the repair. His A/C was not working properly for a while and driving NSX to Silverstone under this hot weather condition was ...
Updated 24-07-2012 at 10:22 AM by Kaz-kzukNA1 (Publish date and time corrected.)