The parking brake cable was stuck inside the L-shaped bracket on the brake caliper. And the two bolts holding this bracket were heavily corroded so I had to be really careful not to sear them off. I’ll replace them with the new one on installation. If I have the time, will try separating the cable from the bracket ...
Updated 14-04-2014 at 10:53 AM by Kaz-kzukNA1 (Added parking brake cable photo.)
In order to take the engine out of the bay, I need to disconnect the RR wheel speed sensor connector that is located behind the boot carpet. I just couldn’t stand the awful smell of the boot carpet and also it was covered in grass and mud (probably, the owner loves playing golf). As the weather is getting better, decided to take the entire carpet out from the boot and going to pressure wash it followed by IPA ...
Have been working on another NSX for several days now so catching up on updating the blog. The service menu is the Eng Refresh + LMA and based on the previous investigation on this engine, it requires the head gasket job as well. Ideally, I wanted to combine as many services as possible while the engine is out of the bay but it is important to discuss the priorities with the owner as well. So, based ...