View RSS Feed

All Blog Entries

  1. Eng Refresh 23

    by , 15-03-2014 at 01:42 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    Bleeding of CL Hyd Sys.

    Unlike the brake master cyl that consists of twin piston tandem system with
    criss-cross flow, CL master cyl is just a single piston/line.
    As long as you can prime the master cyl enough, air bleeding is fairly easy
    and can be done with just hand operation.

    After priming the CL master
    ...
  2. Eng Refresh 22

    by , 12-03-2014 at 12:29 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    Vacuum filled the Honda Type-2 blue coolant.
    Nothing special here and probably you've got bored by
    looking at the same photos many times in my blog.
    Bear with me as it's for each owner and the photos are stored in
    their individual album.



    ...
  3. It’s been three years...

    by , 11-03-2014 at 02:51 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)


    ..... since the big earthquake and huge tsunami hit north part of Japan.
    Many people lost their lives, about 2,600 people still missing and around 267,000 people can’t return to their places and living in temporary houses.

    I heard that some NSX owners were affected.
    I was in UK but my wife, parents and families were in Japan at that time and although we were trained
    from very young age on what to do at the time of earthquake, it was nothing like they experienced ...
  4. Eng Refresh 21

    by , 11-03-2014 at 12:27 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)





    It’s the late model engine so instead of metal washer,
    o-ring is used at the fuel line.




    Upper side of the engine is ready for the short burst cranking mode.



    ...
  5. Eng Refresh 20

    by , 11-03-2014 at 12:22 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    Preparation for the fire up.




    Probably not necessary but just as my standard procedure,
    fresh Mobil 1 into the oil filter and into the engine.




    Sub frame bolts and all four mounts torqued
    ...