Managed to go out for the test driving session for the first time after replacing the radiator. I don’t know what’s happening with the weather over the last few years..... Last year, we managed to do BBQ in late March early April and then just wet weather to follow. This year, we are still getting snow...... Any way back to the service. For this NSX, I on purposely didn’t carry ...
Updated 29-03-2013 at 10:13 AM by Kaz-kzukNA1
Not much to report. Just a quick eng oil and filter change. Draining the old oil from the bottom and then pump out further 300 - 400cc or so from the top. ...
Updated 18-03-2013 at 02:45 PM by Kaz-kzukNA1
Now comes the extra work....... When I tried to install the LED from UK vendor to the ceiling light, I was not comfortable with the limited gap at the base of the bulb holder. Because of the metal heatsink, it could create a short circuit with the vibration. ...
Updated 17-03-2013 at 01:21 PM by Kaz-kzukNA1
I have been testing the super bright LED festoon bulbs on NSX and MX-5 for a few years now and fairly happy with it. One of the LED at my ceiling light failed just after a year but rest of them are still surviving. The only problem is that the vendor in Japan is so busy with other projects that he is putting lower priority with his LED business and thus, being told that he won’t be able to supply the same spec until ...
Updated 17-03-2013 at 04:29 PM by Kaz-kzukNA1
If you are doing DIY, you can clean the contacts on your existing cable but if not, just replace it with the new one. It’s not an expensive parts (well at least if you order it from Japan) so cheaper to replace than cleaning it. The old one. ...
Blog Categories
Archive
Recent Comments
