Probably, you have heard the same word many times in my blog and post. “What a simple word to explain the time consuming task of replacing …..”. That's exactly what I say when replacing these coolant hoses especially when it is getting cold. Coolant hoses ...
New slave cyl, new hose and bolts about to be installed. Bleeding the CL hydraulic system is not that difficult because it’s a single piston ...
New master cyl. From around 2000 model, Honda modified the centre pin design and the pushrod locking method at the CL master ...
The gasket for the existing thermostat was not installed properly causing small leakage around the area. Looks like I need to spend some time cleaning the area as there are lots of oxidation and debris from the leaked coolant. ...
Updated 14-10-2012 at 01:18 PM by Kaz-kzukNA1
While working on the coolant hoses, not much to say. Just keep draining the old coolant and removing the existing hoses. The existing coolant was red colour one so needs to be flushed really well. Draining the coolant from the front and rear engine block. As seen on several ...