Recent Blogs Posts

In the process of replacing the CL Hyd system.
Just black fluid in the reservoir.
It's the debris from the aluminium cyl wall and deteriorated rubber cup....

Looks like someone just kept topping up the fluid when the level dropped.
Fluid doesn’t just disappear so should have checked where it has leaked.

...

Tags: cl hose, cl master cyl, cl slave cyl, master cyl, pressure bleed, slave cyl, tail light, tail light assy

Categories

Health Check Service , Clutch Master/Slave Cyl , Body

So, started to work on another NSX.
The service menu is to replace all of the coolant hoses, CL Hyd sys,
ABS flush, etc, etc, etc…





When the owner arrived at my place, he told me that
his door mirror adjuster no longer works in the up/down direction.

He had the mirror plate replaced ...

Tags: cl master, cl slave, coolant hose, door mirror, master cyl, slave cyl, targa roof

Categories

Engine/Tyre , Cooling , Clutch Master/Slave Cyl , Personal View/Self Talk

Before start bleeding the CL Hyd system, place the bleeder plug pointing upwards to help the bleeding process.


As the master cyl was primed before the installation, it took just one pedal stroke before the fluid level started to change.


However, super dirty black fluid kept coming out from the bleeder even after lots of pedal strokes with self top up container attached to the reservoir. ...

Updated 15-06-2011 at 10:07 PM by Kaz-kzukNA1 (Additional photo)

Tags: pressure bleed, slave cyl

Categories

Transaxle , Clutch Master/Slave Cyl