View RSS Feed

Recent Blogs Posts

  1. Cooling Sys, Health Check, etc 30

    by , 19-07-2016 at 11:42 AM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)
  2. Carpet, Interior Panel, Health Check, etc 11

    by , 12-05-2016 at 02:28 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)
  3. Annual Service, Health Check, etc 07

    by , 10-12-2015 at 11:10 AM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)

    Nothing special and just usual vacuum leak check of the cooling system followed by the vacuum feed of Honda Type 2 coolant.

    As we are not going to replace the coolant hoses this time, some old Type 2 coolant was left in the system. Therefore, I recommend the owner to replace the coolant again in 2 years time to be on the safe side. Normally, you can go for 4
    ...
  4. Health Check, Annual Service 03

    by , 19-10-2015 at 09:39 PM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)



    Pressure bleeding the brake fluid.
    As the owner must replace the rear brake pad, decided to set the fluid level like this on purposely as someone must wind back the rear piston in order to install the new pads and I don’t want to see
    ...
  5. ABS Upgrade, Door Window Refresh, etc 04

    by , 02-06-2015 at 10:57 AM (Today at Atelier Kaz - Private NSX Enthusiast, ex-Honda R&D engineer with F1, Indy/CART background)










    Modified the ABS Upgrade Loom from T3Tec in preparation for the installation.

    Anyone who asked me to carry out the ABS upgrade or bought the ABS upgrade loom through me will receive the English version of installation manual that I created.
    It’s my property so hope no one will distribute it
    ...
Page 1 of 6 123 ... LastLast