...
Updated 24-11-2013 at 02:05 PM by Kaz-kzukNA1
This side of the engine is nearly done. Time to finish the intake manifold. The 90deg swaging of the VVIS plate screw against the shaft. ...
Updated 17-09-2013 at 11:51 AM by Kaz-kzukNA1
Time to inspect the VVIS plates. This engine uses the OEM parts (side intake chamber, air box, air filter, TH body) for the intake air system so the amount of debris inside the intake manifold was minimum. Some of the black bits are the edge coating around the VVIS plate. Every ...
Updated 15-09-2013 at 02:53 PM by Kaz-kzukNA1