View RSS Feed

Recent Blogs Posts

  1. Kaz-kzukNA1's Avatar

    TB/WP/Valve 15

    by
    Kaz-kzukNA1
    , 17-05-2011 at 11:28 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)



    Looks like the site is back and up running     again....



    Click image for larger version.  Name: RearDone.JPG  Views: 977  Size: 194.3 KB  ID: 9332
    Click image for larger version.  Name: FrontMidCover.JPG  Views: 1017  Size: 174.2 KB  ID: 9331

    Rear bank valve clearance adjustment was double checked and done.


    In the process of putting everything back in place.


    As mentioned previously, it is always good idea to use the alignment pin (parallel punch) for the Front bank cam shaft to align the bolt holes during the installation ...
    Categories
    TB/WP/Valve Service , Engine/Tyre
    Comments 0 Comments
    Read MoreRead More
  2. Kaz-kzukNA1's Avatar

    TB/WP/Valve 12

    by
    Kaz-kzukNA1
    , 11-04-2011 at 11:30 PM (Today at Atelier Kaz - ex-Honda R&D, F1, Indy/CART engineer)
    Click image for larger version.  Name: RearDone.JPG  Views: 1262  Size: 208.0 KB  ID: 8948
    Click image for larger version.  Name: 3rdTimeCheck.JPG  Views: 1190  Size: 174.9 KB  ID: 8951


    The Valve clearance adjustment at the Rear bank is finished.


    As the temperature dropped significantly today compared to the weekend, decided to check the clearance on all six cylinders again for the 3rd time.


    Made minute adjustment at one out of twenty four adjusters.



    Time to reassemble everything.

    Click image for larger version.  Name: Align.JPG  Views: 1277  Size: 164.8 KB  ID: 8949
    Click image for larger version.  Name: FourO2Sens.JPG  Views: 1201  Size: 141.3 KB  ID: 8947
    ...

    Updated 23-04-2011 at 11:06 PM by Kaz-kzukNA1

    Categories
    TB/WP/Valve Service , Engine/Tyre
    Comments 0 Comments
    Read MoreRead More